How to Fix Port Forwarding Not Working Netgear Issue

netgear router not working

Netgear routers are renowned for their elegant design and ease-of-use. Due to this, these devices have earned a massive user base. Regardless of its optimal functions and ability, users often experience a lot of technical glitches with their Netgear router such as not working and the default gateway doesn’t work.

Port forwarding not working Netgear is one more issue which is a real pain for users. It mainly occurs in Netgear routers because of the server faults or system misconfiguration.

If you are also in the same boat i.e. facing the same issue, you are likely looking for technical help to get rid of this troublesome situation. In this post, we will share all the root causes as well as premium solutions to troubleshoot this Netgear router error within a few minutes. Read on.

Causes for Port Forwarding Not Working Netgear Problem

In case you come across this frustrating problem, there may be various reasons behind this issue. Here is a list of its root causes:

  • Chances are that the port forward rule is mistakenly disabled on your Netgear router.
  • Outdated firmware on your router will definitely result in this Netgear error.
  • At times, misconfiguration of the firewall and disabling the DMZ server will also cause this issue.

But fortunately, we have got some flawless hacks to fix port forwarding not working Netgear problem. Let’s elaborate them:

Quick Fixes for Port Forwarding Not Working Netgear Issue

Solution 1: Enable the Port Forwarding Rule on Netgear Router 

Ensure to turn on the port forwarding rule on your Netgear WiFi router. Go through the instructions mentioned below to get the job done:

  • Power on your WiFi router properly.
  • Turn on your PC and connect it to the router.
  • After that, open a web browser on your PC and access web address.
  • Input the login ID and password of your router into the given fields.
  • Once logged in, find the port forwarding option and click on that.
  • Enter the port range or port number which you wish to forward.
  • Finally, type the static IP address and click on the Enable option.

Now, close all the tabs and restart your Netgear WiFi router to check whether the issue is fixed or not. If not, try the next solution outlined below.

Solution 2: Upgrade the Firmware on Your Netgear Router

On the off chance that the Netgear firmware is out-of-date, possibilities are there might be a genie port not forwarding problem on your WiFi router. Here’s how to update the firmware on your Netgear router:

  • Connect your Netgear router and computer using an Ethernet cable.
  • Join a wireless network connection and open any internet browser on your PC.
  • Go to the default router login web page.
  • Use the correct username and password and log in to your Netgear wireless router.
  • Navigate to the Advanced section.
  • After that, click on the Admin > Firmware Update option.

Check if there is any new Netgear router firmware available. If available, follow the on-screen prompts to upgrade your router’s firmware manually. Once done, close all the tabs and restart your router. If you face any issue while updating the router firmware, you can contact the experts at any time.

Solution 3: Turn Off the DMZ Port on Your Netgear Router 

DMZ or Demilitarized Zone is a built-in feature in Netgear routers which enable it to host the internal network having all TCP and UDP ports. At times, the DMX gets enabled by mistake or itself on account of some technical faults which result in the port forwarding not working Netgear problem. Below-given are the instructions to disable the DMZ port on your WiFi router:

  • At first, power on your computer and launch a web browser.
  • Thereafter, head over to the default setup portal and navigate to the Login Management web-based page.
  • Now, open a new tab in your browser and type IP address and hit enter.
  • Fill in the user ID and passphrase and click on the login button.
  • After login, configure the DMZ and click on Forward option.
  • Choose the Disable option and enter the IP host device.
  • Once done, click on the Save button.

Now, restart your Netgear router and see if the issue is resolved now or not.

Our list of premium fixes for port forwarding not working Netgear issue ends here. If you have your own fixes, do share them with us via the comments below.

6 Best eCommerce Platforms for Businesses in 2019

Previous article

What type of Devices can be used with Netgear WiFi Range Extender

Next article

You may also like


Leave a reply

More in Computer